Your Roof Replacement Cost – Fast & Free. Click Here to Get Your Instant Quote!
Orca Roofing & Exteriors is a licensed deck contractor serving Bellevue homeowners throughout King County. We build and replace decks of all sizes — from ground-level cedar builds to elevated composite structures on Bellevue’s hillside lots — with transparent pricing, proper permits, and no subcontracted crews.
Schedule Your On-Site Estimate in Bellevue
The form that goes in all the locations
Not sure which material fits your project? Our complete decking material guide compares every option side by side with PNW-specific performance data.
Orca Roofing & Exteriors has been building and replacing decks across Bellevue and King County for over a decade — with the local knowledge, material relationships, and permitting experience that only comes from doing this work here, year after year.
Our contractor license is verifiable at lni.wa.gov. We carry full liability and workers’ compensation coverage — you’re protected from day one, not just while we’re on site.
We build every deck for Western Washington’s climate — wet winters, UV summers, and everything in between. The materials we spec, the way we frame, and the details we focus on are all chosen for long-term performance in our specific conditions. Not built for a drier climate and hoped it holds up here.
Every estimate breaks down labor, materials with specific product names, permit fees, demolition if applicable, and cleanup. You see every line item before signing anything.
Your project manager is on site from structural assessment through final inspection. The crew building your deck is our crew — not a third party we have no control over mid-project.
Every Orca deck project follows the same four-step process — designed around King County permitting timelines, Pacific Northwest site conditions, and your specific lot.
We start with a full on-site structural assessment — not just a surface look. On replacement projects, we inspect the ledger board connection, post bases, joist condition, and footing integrity. In Bellevue’s hillside lots, we also evaluate slope, drainage, and load requirements before a design is proposed.
Based on your site assessment, we walk you through material options — cedar, Trex, TimberTech, PVC, or Aspire Pavers — with honest recommendations based on your lot’s moisture exposure, sun, slope, and HOA requirements. You receive a fully itemized estimate with specific product names, permit fees, demolition costs if applicable, and cleanup. No single-number bids.
We pull all required permits through King County or the City of Bellevue and coordinate the full inspection schedule — you manage zero paperwork. Permit approval in Bellevue typically takes 2–4 weeks. We factor this into the timeline from day one so construction begins the moment we’re cleared.
Our crew builds with corrosion-resistant hardware rated for Pacific Northwest moisture exposure throughout — not standard steel that corrodes in 3–5 years in our climate. Every project closes with the required county inspection and our own walkthrough covering every connection, railing, and finish detail. The permit closes before we hand off the project.
Deck pricing in Bellevue is driven by material choice, square footage, lot complexity, and whether demolition is required. These are honest installed cost ranges for licensed, permitted projects in King County
| Installed Cost (per sq ft) | Project Type |
|---|---|
| $18–$28 per sq ft | Cedar or pressure-treated, ground-level, standard framing |
| $28–$42 per sq ft | Composite (Trex, TimberTech), standard complexity |
| $42–$65 per sq ft | Elevated builds, sloped lots, custom railings |
| $65–$85+ per sq ft | Multi-level, engineered footings, premium composite |
Demolition of an existing deck adds $3–$8 per sq ft. King County permits run $500–$1,500 depending on scope. All Orca estimates are fully itemized — no surprises mid-project.
For a full breakdown, see our deck replacement cost guide
We build and replace decks throughout Bellevue and the broader King County and Pierce County area. We regularly work in West Bellevue, Medina, Somerset, Newport Hills, Bridle Trails, Lake Hills, Crossroads, Eastgate, and Factoria. Each with distinct lot conditions, HOA standards, and permitting considerations our team knows well.
Pierce County builds, waterfront properties, composite and PVC installs for high-moisture sites.
Pierce County residential builds, cedar and composite options for South Sound homeowners.
Lakefront and hillside builds across Kirkland and the North Eastside corridor.
Whether you need a deck replacement or a new build, Orca Roofing & Exteriors is the licensed deck contractor Bellevue, WA homeowners trust — transparent pricing, King County permits handled, and builds designed to last in the Pacific Northwest.
$18–$28/sq ft for cedar, $28–$42 for composite, $42–$65+ for elevated or sloped-lot builds. Demolition adds $3–$8/sq ft. Permits $500–$1,500. All estimates fully itemized. For more information visit our guide about the cost to replace a deck.
Yes — most deck builds and replacements require a permit through King County or the City of Bellevue. We pull all permits and coordinate inspections on your behalf.
For most Bellevue builds, Trex Transcend or TimberTech AZEK — fully capped composite with 25+ year warranties. Cedar for well-drained south-facing sites. TimberTech AZEK for hillside or shaded lots with above-average moisture exposure. For more information you can visit our guide about decking materials.
5–10 business days of construction for standard replacements, plus 2–4 weeks for King County permit approval. Complex hillside builds run 2–4 weeks of construction. Weather delays are common October–April.
If framing — joists, posts, ledger board — is sound, repairs can add 10–15 years. If framing shows rot or repair costs approach 50–60% of replacement cost, full replacement is the smarter investment. We assess on-site and give you a straight answer.
Yes. We’re familiar with HOA standards in Newport Hills, Bridle Trails, Somerset, and other Bellevue communities. We prepare documentation and factor approval timelines into the project schedule.