Orca Roofing & Exteriors is a licensed deck contractor serving Puyallup homeowners throughout Pierce County. We build and replace decks of all sizes — from ground-level cedar builds in South Hill and Frederickson to composite structures on Puyallup’s sloped residential lots — with transparent pricing, Pierce County permits handled, and no subcontracted crews.
The form that goes in all the locations
We are your licensed Puyallup deck contractor, specializing in deck installation, replacement, and new construction for homes across Pierce County — built for Pacific Northwest conditions.
Is your deck showing rot, structural instability, or simply past its useful life? We handle the full replacement — demolition, permitting, framing, and finish work — with a single crew and one point of contact throughout.
Building from scratch? We assess your lot’s slope, drainage, setback requirements, and sun exposure, then design a deck that performs in Pierce County’s climate and meets permitting requirements — before a single board goes down.
Not sure if your deck needs repair or full replacement? We inspect the full structure — ledger board connection, post bases, joist condition, footing integrity — and give you a straight answer. If repair is the right call, we’ll tell you that too.
Deck projects in Puyallup require permits through Pierce County or the City of Puyallup depending on jurisdiction. We manage the full permit application, inspection schedule, and permit closure. You don’t manage a single form.
Puyallup’s mix of flat valley lots, South Hill slopes, and high-rainfall conditions affects material performance significantly. For every deck installation in Puyallup we assess those site-specific conditions first — sun exposure, slope, drainage, and moisture — and recommend accordingly.
A viable choice for well-drained, south-facing Puyallup lots with good sun exposure — parts of South Hill and Frederickson often qualify. With biannual sealing, a cedar deck lasts 15–25 years. Not recommended for shaded lots or sites with persistent drainage challenges — composite or PVC is the correct spec where chronic moisture is a factor. See our cedar deck page for full details.
The most widely installed composite in Pierce County — fully wrapped, fade-resistant, and warranted for 25 years. No staining, no sealing, no splinters. Annual cleaning only. Our most commonly specified product for standard Puyallup residential builds. See our composite deck page and Trex decking cost guide for pricing by product line.
Premium composite with advanced polymer shell — our recommendation for elevated builds on South Hill’s sloped lots and any site where moisture exposure and structural complexity are elevated. Lifespan of 25–50 years. See our TimberTech deck page for a full breakdown of PRO vs. AZEK.
100% synthetic — zero wood fiber, zero moisture absorption. The right choice for any Puyallup site with chronic drainage issues or north-facing exposure where sustained moisture and minimal maintenance are priorities. See our PVC deck page.
As a preferred Aspire by Brava contractor, we install these slip-resistant composite pavers for ground-level deck installations. Made from 95% recycled materials, virtually no maintenance required, and superior wet-surface traction — meaningful in Pierce County’s high-rainfall season. See our Aspire Pavers page.
Not sure which material fits your project? Our complete decking material guide compares every option side by side with PNW-specific performance data.
Orca Roofing & Exteriors has been building and replacing decks across Puyallup and Pierce County for 6 years. We’re not a large multi-city franchise — we’re an independent licensed contractor with in-house crews, one project manager on every job, and fully itemized pricing before you commit to anything.
Our contractor license is verifiable at lni.wa.gov. We carry full liability and workers’ compensation coverage — you’re protected from day one, not just while we’re on site.
We build every deck for Western Washington’s climate — wet winters, UV summers, and everything in between. The materials we spec, the way we frame, and the details we focus on are all chosen for long-term performance in our specific conditions. Not built for a drier climate and hoped it holds up here.
Every estimate breaks down labor, materials with specific product names, permit fees, demolition if applicable, and cleanup. You see every line item before signing anything.
Your project manager is on site from structural assessment through final inspection. The crew building your deck is our crew — not a third party we have no control over mid-project.
Every Orca deck project follows the same four-step process — designed around Pierce County permitting timelines, Pacific Northwest site conditions, and your specific lot.
We start with a full on-site structural assessment — not just a surface look. On replacement projects, we inspect the ledger board connection, post bases, joist condition, and footing integrity. On Puyallup’s South Hill sloped lots, we also evaluate slope stability, drainage, setback requirements, and load requirements specific to elevated structures before any design is proposed. You get a straight answer on what the structure needs — and what it doesn’t. For the warning signs to look for before calling anyone, see our common deck problems guide.
Based on your site assessment, we walk you through material options — cedar, Trex, TimberTech, PVC, or Aspire Pavers — with honest recommendations based on your lot’s slope, shade level, and moisture exposure. For sites with chronic drainage or north-facing exposure, we default to fully wrapped composite or PVC. You receive a fully itemized estimate with specific product names, permit fees, demolition costs if applicable, and cleanup. No single-number bids. Not sure if you need repair or full replacement? Our repair vs. replace guide covers the full decision framework.
We pull all required permits through Pierce County or the City of Puyallup and coordinate the full inspection schedule — you manage zero paperwork. Permit approval in Puyallup typically takes 2–4 weeks. We factor this into the timeline from day one so construction begins the moment we’re cleared.
One licensed in-house crew builds your deck from framing through finish work, with a dedicated project manager on site throughout. Final inspection sign-off from Pierce County closes the permit — and that’s the document that protects you at resale and confirms the work meets code.
Deck installation pricing in Puyallup is driven by material choice, square footage, lot conditions, and whether demolition is required. South Hill sloped lots typically require additional structural engineering compared to valley flat-lot builds. These are honest installed cost ranges for licensed, permitted projects in Puyallup:
| Installed Cost (per sq ft) | Project Type |
|---|---|
| $18–$28 per sq ft | Cedar or pressure-treated, ground-level, standard framing |
| $28–$42 per sq ft | Composite (Trex, TimberTech), standard complexity |
| $42–$65 per sq ft | Elevated builds, sloped lots, custom railings |
| $65–$85+ per sq ft | Multi-level, engineered footings, premium composite |
Demolition of an existing deck adds $3–$8 per sq ft. Pierce County permits run $500–$1,500 depending on scope. For a full breakdown of what drives pricing across Pierce County.
For a full breakdown, see our deck replacement cost guide
We build and replace decks throughout Puyallup and the broader Pierce County area — including South Hill, Frederickson, Sumner, Edgewood, and Bonney Lake. Looking for deck services in another part of the Puget Sound? We also serve:
Pierce County builds, waterfront properties, composite and PVC installs for high-moisture sites.
King County builds, hillside lots, composite and cedar installs for Eastside homeowners.
Lakefront and hillside builds across Kirkland and the North Eastside corridor.
Whether you need a deck replacement or a new build, Orca Roofing & Exteriors is the licensed deck contractor Puyallup, WA homeowners trust — transparent pricing, Pierce County permits handled, and builds designed to last in the Pacific Northwest.
Deck installation in Puyallup runs $18–$28 per sq ft for cedar on flat well-drained sites, $28–$42 for composite (Trex, TimberTech), and $42–$65 or more for elevated builds on South Hill sloped lots where additional structural engineering is required. Pierce County permits add $500–$1,500. Demolition adds $3–$8 per sq ft. All Orca estimates are fully itemized — no single-number bids. See our deck replacement cost guide for a full Pierce County breakdown.
Yes in most cases. Any deck attached to the house, elevated more than 30 inches above grade, or over 200 sq ft requires a permit through Pierce County or the City of Puyallup depending on your jurisdiction. We manage the full permit process — application, inspection scheduling, and final sign-off. A contractor who suggests skipping the permit is transferring liability to you.
It depends on your specific lot. Cedar works well on south-facing flat sites in Frederickson and parts of South Hill with good drainage. For most Puyallup residential builds — especially on sloped or shaded lots — composite decking is the standard recommendation. TimberTech AZEK is our default spec for elevated South Hill builds where moisture exposure and structural complexity are highest. PVC for any site with chronic drainage challenges. Our decking material guide covers every option with a 20-year cost comparison.
If the structural framing — joists, posts, and ledger board — is sound and damage is isolated to surface boards, repair adds 10–15 years at a fraction of replacement cost. If rot appears in more than 30% of the framing, the ledger connection is compromised, or repair quotes approach 50–60% of replacement cost, full replacement is almost always the smarter investment. Our repair vs. replace guide covers the full decision framework with real cost thresholds.
Yes. We build and replace decks across all of Puyallup and Pierce County — South Hill, Frederickson, Sumner, Edgewood, Bonney Lake, and the broader Pierce County area. South Hill sloped lots require different material specs and structural engineering than flat valley builds in Frederickson — our team assesses each site individually before proposing any design or pricing.
